| Author |
Message |
finotti
|
|
Post subject: [SOLVED] Keyboard/Mouse
 Posted: 13.02.2018, 15:13
|
|
Joined: 2010-09-12
Posts: 493
Status: Offline
|
|
I've just DUed and updated to the new Plasma (5.12), KDE Frameworks (5.42) and kernel (4.15.0-2.slh.2-aptosid-amd64). (I think my previous update wasn't too long ago, maybe a couple of weeks.)
On reboot, the mouse and keyboard (USB) were unresponsive. I tried booting with the previous kernel (4.14.0-14.slh.1-aptosid-amd64, I think) and had the same results. Booting in rescue mode the keyboard was working. (I can't tell if the mouse was...)
Now after a new reboot, I tried pluging in another USB mouse. It did not work. After one more (I tried the usual mouse and keyboard, and still did not work), I tried the same second mouse at a different port, and it worked, but then the usual mouse and keyboard started working again.
I haven't tried to replicate the problem yet, as it is my work computer, and I was afraid I would not be able to make it work again.
I am not sure if pluging in the new mouse helped, or if the usual mouse and keyboard just needed some extra time to start to work...
In any event, here is the errors I get:
Code:
]# journalctl -b -p err
-- Logs begin at Tue 2018-02-13 09:45:34 EST, end at Tue 2018-02-13 09:52:23 EST. --
Feb 13 09:45:34 finottim83 kernel: tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
Feb 13 09:45:34 finottim83 kernel: tpm tpm0: A TPM error (6) occurred attempting to read a pcr value
Feb 13 09:45:35 finottim83 rsyslogd[793]: Could not open output pipe '/dev/xconsole':: No such file or directory [v8.32.0 try http://
Feb 13 09:45:38 finottim83 kernel: usb 3-4: device descriptor read/64, error -110
Feb 13 09:45:53 finottim83 kernel: usb 3-4: device descriptor read/64, error -110
Feb 13 09:45:59 finottim83 kernel: usb 3-4: device descriptor read/64, error -110
Feb 13 09:46:15 finottim83 kernel: usb 3-4: device descriptor read/64, error -110
Feb 13 09:46:27 finottim83 kernel: usb 3-4: device not accepting address 8, error -62
Feb 13 09:46:38 finottim83 kernel: usb 3-4: device not accepting address 9, error -62
Feb 13 09:46:38 finottim83 kernel: usb usb3-port4: unable to enumerate USB device
Feb 13 09:47:04 finottim83 /hp-systray[2254]: hp-systray[2254]: error: option -s not recognized
Feb 13 09:47:06 finottim83 spice-vdagent[2431]: Cannot access vdagent virtio channel /dev/virtio-ports/com.redhat.spice.0
The USB errors were appearing when I was in rescue mode, and when I turned off the computer (with the physical buttom, that triggered the shutdown) every time.
Here is some info:
Code:
# lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 011: ID 17ef:6019 Lenovo
Bus 003 Device 010: ID 0bda:0184 Realtek Semiconductor Corp. RTS5182 Card Reader
Bus 003 Device 005: ID 0461:4e04 Primax Electronics, Ltd
Bus 003 Device 003: ID 2109:2811 VIA Labs, Inc. Hub
Bus 003 Device 004: ID 17ef:a000 Lenovo
Bus 003 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Code:
# inxi -v3
System: Host: finottim83 Kernel: 4.15.0-2.slh.2-aptosid-amd64 x86_64 bits: 64 gcc: 7.3.0
Desktop: KDE Plasma 5.10.5 Distro: aptosid 2013-01 Ἑσπερίδες - kde-full - (201305050307)
Machine: Device: desktop System: LENOVO product: 10ANS0BH00 v: ThinkCentre M83 serial: MJ01YGQ0
Mobo: LENOVO model: SHARKBAY v: SDK0E50510 WIN serial: N/A UEFI: LENOVO v: FBKTA1AUS date: 10/22/2014
CPU: Quad core Intel Core i7-4790 (-MT-MCP-) arch: Haswell rev.3 cache: 8192 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 28732
clock speeds: max: 4000 MHz 1: 1161 MHz 2: 1780 MHz 3: 1776 MHz 4: 1742 MHz 5: 1779 MHz 6: 1224 MHz
7: 1784 MHz 8: 1725 MHz
Graphics: Card: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller bus-ID: 00:02.0
Display Server: x11 (X.Org 1.19.6 ) driver: intel Resolution: 1920x1200@59.95hz, 1280x1024@60.02hz
OpenGL: renderer: Mesa DRI Intel Haswell Desktop version: 4.5 Mesa 17.3.3 Direct Render: Yes
Network: Card: Intel Ethernet Connection I217-LM driver: e1000e v: 3.2.6-k port: f080 bus-ID: 00:19.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: 44:39:c4:8f:0a:41
Drives: HDD Total Size: 1012.2GB (67.5% used)
ID-1: model: WDC_WD5000AAKX
ID-2: model: Crucial_CT512M55
Info: Processes: 274 Uptime: 19 min Memory: 2604.0/31969.5MB Init: systemd runlevel: 5 Gcc sys: 7.3.0
Client: Shell (bash 4.4.181) inxi: 2.3.56
Hmm... Maybe I am not in Plasma 5.12 after all.... Here is the result of 'cat /var/log/dpkg.log | grep installed | grep -v half-installed ': https://pastebin.com/53pqt9Vg
Any help would be greatly appreciated. |
Last edited by finotti on 16.02.2018, 18:55; edited 1 time in total
|
| |
|
|
|
 |
|
finotti
|
|
|
Post subject: RE: Keyboard/Mouse
Posted: 13.02.2018, 15:34
|
|
Joined: 2010-09-12
Posts: 493
Status: Offline
|
|
OK, so the update was not for 5.12, but a new one now seems to have done it:
Code:
# inxi -v3
System: Host: finottim83 Kernel: 4.15.0-2.slh.2-aptosid-amd64 x86_64 bits: 64 gcc: 7.3.0
Desktop: KDE Plasma 5.12.0 Distro: aptosid 2013-01 Ἑσπερίδες - kde-full - (201305050307)
Machine: Device: desktop System: LENOVO product: 10ANS0BH00 v: ThinkCentre M83 serial: MJ01YGQ0
Mobo: LENOVO model: SHARKBAY v: SDK0E50510 WIN serial: N/A UEFI: LENOVO v: FBKTA1AUS date: 10/22/2014
CPU: Quad core Intel Core i7-4790 (-MT-MCP-) arch: Haswell rev.3 cache: 8192 KB
flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx) bmips: 28735
clock speeds: max: 4000 MHz 1: 1536 MHz 2: 1409 MHz 3: 1591 MHz 4: 1529 MHz 5: 1801 MHz 6: 1796 MHz
7: 1436 MHz 8: 1527 MHz
Graphics: Card: Intel Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller bus-ID: 00:02.0
Display Server: x11 (X.Org 1.19.6 ) driver: intel Resolution: 1920x1200@59.95hz, 1280x1024@60.02hz
OpenGL: renderer: Mesa DRI Intel Haswell Desktop version: 4.5 Mesa 17.3.3 Direct Render: Yes
Network: Card: Intel Ethernet Connection I217-LM driver: e1000e v: 3.2.6-k port: f080 bus-ID: 00:19.0
IF: eth0 state: up speed: 100 Mbps duplex: full mac: 44:39:c4:8f:0a:41
Drives: HDD Total Size: 1012.2GB (67.5% used)
ID-1: model: WDC_WD5000AAKX
ID-2: model: Crucial_CT512M55
Info: Processes: 311 Uptime: 11 min Memory: 6047.9/31969.5MB Init: systemd runlevel: 5 Gcc sys: 7.3.0
Client: Shell (bash 4.4.181) inxi: 2.3.56
And indeed, it was just a matter of waiting for the mouse and keyboard to start working.
On the other hand, with the new reboot I had to manually start the network connection... (With 'ifup eth0'.)
So, not a big deal, of course, but it is an annoying issue.... |
|
|
| |
|
|
|
|
|
slh
|
|
|
Post subject: RE: Keyboard/Mouse
Posted: 13.02.2018, 22:35
|
|
Joined: 2010-08-25
Posts: 962
Status: Offline
|
|
If I understand you correctly, you're seeing the same issues both with the old (4.14, previously working) and the new (4.15) kernel, that would rule out a kernel regression. The TPM errors shouldn't be a problem, as you probably don't have TPM hardware to begin with (there could be timeout problems caused by this, but that would delay the whole boot, not just USB).
I have seen USB errors like yours, which can cause the USB subsystem to fail completely - the rest of the system boots completly though (so it is accessible via network, the power button works (it's not USB based), a PS/2 keyboard/ mouse would work, etc.). To me personally it looks as if 'something' manages to confuse a USB device (a USB kvm switch in my case) up to a point where the kernel can't reset it properly anymore (this means all systems connected to said kvm switch are affected, not just one). Powering off all involved devices (USB devices in particular; it's sufficient to physically unplug the kvm switch to power it off (drain the current) and reconnect it) sorts out the situation for me.
If you still have issues after a complete power-off - and assuming that your USB keyboard comes alive after a few minutes, it would be interesting to time how long that takes, "systemd-analyze blame" and (full) dmesg may help with that. |
|
|
| |
|
|
|
|
|
finotti
|
|
|
Post subject: Re: RE: Keyboard/Mouse
Posted: 14.02.2018, 17:29
|
|
Joined: 2010-09-12
Posts: 493
Status: Offline
|
|
First, again, thanks slh for the great support, as usual!
slh wrote:
If I understand you correctly, you're seeing the same issues both with the old (4.14, previously working) and the new (4.15) kernel, that would rule out a kernel regression. The TPM errors shouldn't be a problem, as you probably don't have TPM hardware to begin with (there could be timeout problems caused by this, but that would delay the whole boot, not just USB).
Indeed, I've been seeing that error for a long time.
slh wrote:
I have seen USB errors like yours, which can cause the USB subsystem to fail completely - the rest of the system boots completly though (so it is accessible via network, the power button works (it's not USB based), a PS/2 keyboard/ mouse would work, etc.). To me personally it looks as if 'something' manages to confuse a USB device (a USB kvm switch in my case) up to a point where the kernel can't reset it properly anymore (this means all systems connected to said kvm switch are affected, not just one). Powering off all involved devices (USB devices in particular; it's sufficient to physically unplug the kvm switch to power it off (drain the current) and reconnect it) sorts out the situation for me.
If you still have issues after a complete power-off - and assuming that your USB keyboard comes alive after a few minutes, it would be interesting to time how long that takes, "systemd-analyze blame" and (full) dmesg may help with that.
OK, so I just tried it now. From the moment I pressed ENTER in Grub to the mouse to start to work was about 1 min and 11 secs. (BTW, this time network started automatically, as usual, but unlike last boot, when I had to manually start it.)
Then, right after logging in KDE:
Code:
# systemd-analyze blame
674ms apt-daily.service
510ms udisks2.service
494ms systemd-fsck@dev-disk-by\x2duuid-560fb5ca\x2db968\x2d4948\x2d9063\x2d7b2570580b6a.service
281ms loadcpufreq.service
278ms libvirtd.service
274ms apache2.service
256ms sshguard.service
236ms gpm.service
231ms distmp3.service
216ms thermald.service
214ms avahi-daemon.service
212ms systemd-logind.service
207ms lm-sensors.service
206ms console-kit-log-system-start.service
198ms atopacct.service
198ms pppd-dns.service
195ms alsa-restore.service
194ms rsyslog.service
191ms data3.mount
186ms systemd-fsck@dev-disk-by\x2duuid-56dd655a\x2dc181\x2d48a8\x2d95ae\x2dc70fefa279b1.service
180ms systemd-fsck@dev-disk-by\x2duuid-d31c605d\x2d8a89\x2d4031\x2d9448\x2d0081c87e29ec.service
176ms dev-sda2.device
134ms systemd-modules-load.service
116ms data.mount
86ms keyboard-setup.service
69ms upower.service
68ms systemd-timesyncd.service
60ms data2.mount
57ms systemd-udev-trigger.service
54ms kdm.service
49ms lvm2-monitor.service
40ms systemd-journald.service
40ms ssh.service
36ms networking.service
34ms polkit.service
33ms wpa_supplicant.service
33ms systemd-tmpfiles-setup-dev.service
32ms user@114.service
27ms systemd-remount-fs.service
27ms ifplugd.service
27ms systemd-udevd.service
21ms boot-efi.mount
20ms user@1000.service
17ms ebtables.service
12ms dev-mqueue.mount
11ms systemd-tmpfiles-setup.service
10ms libvirt-guests.service
9ms sys-kernel-debug.mount
9ms rc-local.service
9ms systemd-user-sessions.service
8ms cpufrequtils.service
8ms dev-disk-by\x2duuid-6fe16d4b\x2dc084\x2d48aa\x2d9902\x2df46d057b1752.swap
8ms systemd-journal-flush.service
8ms console-kit-daemon.service
8ms blk-availability.service
6ms dev-hugepages.mount
6ms systemd-random-seed.service
5ms kmod-static-nodes.service
5ms systemd-update-utmp.service
4ms dns-clean.service
4ms console-setup.service
3ms systemd-backlight@backlight:acpi_video0.service
3ms sddm.service
3ms systemd-update-utmp-runlevel.service
3ms systemd-sysctl.service
2ms resolvconf.service
If I'm reading this correctly, all took less than a second, so maybe nothing wrong there...
Here is the full output of dmesg (right after logging in KDE): https://pastebin.com/FbKB1Gs6
Again, if I am reading this correctly, the problem seems to happen here:
Code:
[snip]
[ 7.761160] usb 3-4: device descriptor read/64, error -110
[ 23.634834] usb 3-4: device descriptor read/64, error -110
[ 23.850816] usb 3-4: new high-speed USB device number 7 using xhci_hcd
[ 29.269664] usb 3-4: device descriptor read/64, error -110
[ 45.146947] usb 3-4: device descriptor read/64, error -110
[ 45.248955] usb usb3-port4: attempt power cycle
[ 45.876915] usb 3-4: new high-speed USB device number 8 using xhci_hcd
[ 51.176965] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 56.808998] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 57.016847] usb 3-4: device not accepting address 8, error -62
[ 57.130905] usb 3-4: new high-speed USB device number 9 using xhci_hcd
[ 62.440980] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 68.072932] xhci_hcd 0000:00:14.0: Timeout while waiting for setup device command
[ 68.280927] usb 3-4: device not accepting address 9, error -62
[ 68.280991] usb usb3-port4: unable to enumerate USB device
[snip -- USB stuff (with no errors) happens in less than a second...]
It seems it takes about a minute to get the USB going, matching my timing.
Here is what is connected:
Code:
# lsusb
Bus 002 Device 002: ID 8087:8000 Intel Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 8087:8008 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 011: ID 17ef:6019 Lenovo
Bus 003 Device 010: ID 0bda:0184 Realtek Semiconductor Corp. RTS5182 Card Reader
Bus 003 Device 005: ID 0461:4e04 Primax Electronics, Ltd
Bus 003 Device 003: ID 2109:2811 VIA Labs, Inc. Hub
Bus 003 Device 012: ID 03f0:0a2a Hewlett-Packard
Bus 003 Device 004: ID 17ef:a000 Lenovo
Bus 003 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
So, I have a printer (HP), an external HD, an external hub (with nothing plugged in it), two monitors with USB connections/hubs (one has a Lenovo sound bar connected, the other has nothing), keyboard and mouse. (The card reader is internal.)
Again, thanks for the help! If slh or anyone has any suggestions, it would be great, but I can live with it if not. |
|
|
| |
|
|
|
|
|
slh
|
|
|
Post subject: RE: Re: RE: Keyboard/Mouse
Posted: 14.02.2018, 20:27
|
|
Joined: 2010-08-25
Posts: 962
Status: Offline
|
|
| Hmm, there's definately something amiss with one device connected to your USB3 port. I'd try to disconnect all devices that aren't crucial for booting and reconnect them (with a reboot inbetween) one by one - ideally connect mouse/ keyboard to a USB2 port, so we can narrow down which device causes your issues. |
|
|
| |
|
|
|
|
|
finotti
|
|
|
Post subject: Re: RE: Re: RE: Keyboard/Mouse
Posted: 15.02.2018, 22:51
|
|
Joined: 2010-09-12
Posts: 493
Status: Offline
|
|
|
slh wrote:
Hmm, there's definately something amiss with one device connected to your USB3 port. I'd try to disconnect all devices that aren't crucial for booting and reconnect them (with a reboot inbetween) one by one - ideally connect mouse/ keyboard to a USB2 port, so we can narrow down which device causes your issues.
Thank you for your suggestion. It was the external HD, using a USB "docking station". Disconnecting the mouse and keyboard were working right away.
Does that mean that the docking station has some hardware problem?
Anyway, thanks again, slh, for your help! |
|
|
| |
|
|
|
|
|
slh
|
|
|
Post subject: RE: Re: RE: Re: RE: Keyboard/Mouse
Posted: 16.02.2018, 01:15
|
|
Joined: 2010-08-25
Posts: 962
Status: Offline
|
|
| More like a firmware problem of that device, so yes, basically a hardware issue (assuming that there is no newer/ fixed firmware version). |
|
|
| |
|
|
|
|
|
finotti
|
|
|
Post subject: RE: Re: RE: Re: RE: Keyboard/Mouse
Posted: 16.02.2018, 18:54
|
|
Joined: 2010-09-12
Posts: 493
Status: Offline
|
|
| Thanks! I will mark it as solved. |
|
|
| |
|
|
|
|
|
|
|
